Furniture Measuring Guide: Room, Doorway, Stair & Lift Access

Will your new sofa or mattress fit through the door, around the corridor and into your room? Measure the whole delivery route before ordering, not just the space where the furniture will sit. Use this guide for landed homes, flats, apartments and condominiums in Malaysia.

Important: Measurements help identify access problems, but do not guarantee that an item can be delivered. Tight clearances, turning space, packaging and safe handling all matter. Contact Lian Star before ordering if any part of the route looks tight. Read our Delivery Policy for delivery information.

1. Start with the furniture and its packaging

Write down the exact model or variant and its width, depth and height. For mattresses, record length, width and thickness. Use centimetres throughout, or millimetres throughout, and label every measurement clearly.

  • Ask for the packed dimensions and the dimensions of the largest separate piece that must pass through the route. Assembled product dimensions alone may not be enough.
  • For sofas, check whether the item arrives in one piece or separate modules. Do not assume legs, arms or backs can be removed.
  • For beds, wardrobes and tables, confirm the size of the largest rigid panel, headboard, base or tabletop and whether assembly at the destination is possible.
  • Allow for packaging, protective materials and handling space. An opening exactly equal to an item's dimensions is not enough evidence that it will fit.

2. Measure the room and final position

Measure the usable floor length and width, ceiling height and the space where the item will stand. Mark its footprint with masking tape. Check that room doors, cupboard doors and drawers can open and that people can move around it. Include skirting boards, columns, window ledges and fixed fittings. For recliners or extendable furniture, check the space needed when fully open.

3. Check gates, doorways and room entrances

Trace the route from the unloading point to the final room. Measure the narrowest clear width and usable height of every gate, grille, lobby entrance, front door and room doorway. Measure the actual opening with the door in its normal fully open position, not the outside of the frame.

Include door leaves, handles, closers, security grilles, thresholds and overhead fittings. Record the space on both sides of each opening so the item can approach, turn and move away. Do not assume doors or grilles can be removed.

4. Measure corridors and tight turns

Measure the narrowest clear corridor width and ceiling height. At every corner, record the approach width, exit width and available turning area. Check for shoe cabinets, meters, pipes, handrails, fire equipment and low beams.

A long sofa may fit along a straight corridor but be unable to turn into a doorway. A doorway-width comparison or diagonal measurement alone does not prove that the item can make the turn. Take photos from both directions and sketch the corner with measurements if access is close.

5. Check stair access and landings

If stairs are part of the route, measure each flight's clear width between the handrails or other fixed obstructions. Record the lowest headroom above the stairs and beneath beams. Measure the usable length and width of every landing, especially at half-turn and spiral stairs, and check doors at the top and bottom.

Photograph turns and overhead restrictions. Tell us the destination floor and the number of flights. Do not assume that stair carry is available when an item cannot use the lift. Ask about feasibility, arrangements and any charges before ordering. Do not attempt to force furniture past rails or lift it over a balcony.

6. Measure the lift entrance and interior separately

Check the lift that building management permits for deliveries. Measure its clear door opening width and height, then its usable internal width, depth and height. Include protective padding, handrails and other obstructions. Measure the lobby turning space outside the lift on both the entry and destination floors.

A large lift cabin is not enough if the item cannot pass through the doors or turn in the lobby. Do not rely only on the lift's diagonal or passenger capacity. Ask building management about goods-lift access, load limits, delivery hours, booking requirements, access permits, deposits and loading-bay restrictions. These vary by building.

7. Give mattresses and bed bases their own access check

Check the exact model's dimensions rather than relying on labels such as queen or king. Include the mattress thickness and packaging when checking doorways, stair turns and lift access. Measure the bed base or divan separately; a rigid base can present a different access problem from the mattress.

Do not assume a mattress can be folded, rolled or sharply bent. Ask for model-specific handling guidance before planning a tight route. If a mattress is supplied compressed or rolled, confirm its actual packed dimensions and handling instructions. Do not assume it can be recompressed after opening.

8. Record your access measurements

Copy this checklist into your notes and fill it in before contacting us:

  • Product name, variant and quantity:
  • Assembled dimensions:
  • Packed dimensions and largest separate piece, confirmed with the store:
  • Room footprint and ceiling height:
  • Narrowest gate or doorway: clear width × height:
  • Narrowest corridor: width × height:
  • Each corridor turn: approach width, exit width and turning area:
  • Stairs: clear width, lowest headroom, landing dimensions and number of flights:
  • Lift doors: clear width × height:
  • Lift interior: usable width × depth × height:
  • Lift lobbies: entry and exit turning space:
  • Destination floor and building delivery requirements:
  • Photos or a short video of tight sections:

9. What to do if clearance is tight

Pause before ordering and WhatsApp Lian Star with the product link, measurements, floor number and route photos. Ask us to confirm the packed dimensions, any permitted disassembly, and the delivery arrangements for your address. A smaller model or a design supplied in separate pieces may be worth considering, but each piece still needs an access check.

Do not arrange crane lifting, balcony access, door removal or other special handling on the assumption that it is included. Confirm any proposed arrangement and charges in advance. This guide does not promise delivery to every floor or room, free stair carry, hoisting or successful access.

10. Prepare the route before delivery

Once arrangements are confirmed, complete any building-management bookings, keep the agreed access route clear and safely move loose obstacles, rugs and fragile items. Keep children and pets away from the handling area. Let us know before delivery if the lift is unavailable, building access changes or renovation work affects the route.

Explore furniture and mattress options

Browse Modular Sofas, Sectional Sofas, Queen Mattresses and King Mattresses. Confirm the dimensions and access requirements for your chosen model before ordering.

For delivery areas and arrangements, refer to our Delivery Policy.

Office Tables

View Collection

Office Chairs

View Collection

Filing & Cabinetries

View Collection